This short video demonstrates the basics of getting a fast, accurate autorefraction and keratomery measurement. Keratometry on QuickSee Free Pro only
Need more help understanding QuickSee Free?
These basic steps will help you start measuring quickly, and avoid common errors.
Align line on device side with patient’s lateral canthus (outside corner of the eye).
Seat device comfortably on patient’s face. Both contact points should touch face. Eyecup should cover orbit of the eye.
Position device on eye; use occluder over other eye; instruct patient to keep eye open.
Steady the device by holding the patient’s face or shoulder.
Stand to one side of the patient. Instruct the patient to look at a target 4–6m away. The patient must not look at the red dot in the optical channel.
The red dot should be over the patient’s pupil. The background will turn green when the camera is aligned.
When the display turns green, the device is ready to measure. Press the button on the screen or the start button on the handle.
A dotted line around the pupil camera will indicate measurement progress. Instruct the patient to blink 2-3 times during measurement.
Autorefraction results displayed on the screen. Keratometry results are available on the QuickSee Free Pro
Press the plus button to start a new measurement.
This two-page PDF gives you an overview of QuickSee operation, to have you taking measurements in just a few minutes. Make sure QuickSee is charged before starting!
These short videos give you an overview of preparing QuickSee and a patient for an autorefraction measurement, and performing the measurement.
Clean QuickSee thoroughly between uses.
Make sure operator and patient are equipped with appropriate personal protective equipment (PPE); breath masks are compatible with QuickSee.
Wash hands thoroughly before and after testing.
Alcohol solutions (70% ethanol, isopropanol) and microfiber cloths recommended; consult the FDA’s List N for other disinfectants effective against SARS-CoV-2.
Remove the eyecup to thoroughly clean it and the viewports.
Do not submerge QuickSee in liquid.
See the BASIC CARE section of the QuickSee User Manual for more information.
Pre-align the PD while standing at a safe distance to the patient. You will likely underestimate PD, so if alignment is not immediately correct once you put QuickSee to the patient’s face, first try widening the PD.
Use QuickSee while standing at the patient’s right shoulder, instead of directly in front of them, thereby reducing direct exposure to one another’s breath.
QuickSee is not sensitive to ambient light, so it works indoors and outdoors. Use QuickSee while the patient is in their car or waiting outside the examination room.
This update to the QuickSee software introduces the redesigned user interface (UI) to make alignment easier, and other new usability and convenience features. You can use the QuickSee Companion App on a smartphone or Windows PC to update the firmware. Learn more about key features of the new UI
Before you start:
✔ We recommend you connect QuickSee to power during the update procedure.
✔ QuickSee is updated with the QuickSee Companion App for smartphones. If you have not already paired your QuickSee with a Companion App, see “Pairing your QuickSee with the QuickSee Companion App for the first time,” above.
Tap the Check for new firmware icon (?) to check if there is a later available version for the device (Figure 2). Note: The Companion App must be connected to the Internet to check for new firmware
If there is no new version of the firmware, you will see your installed version and a check mark (Figure 3). You’re all set!
When you tap the Check for new firmware button, ✔ the new QuickSee firmware is downloaded to the Companion App, transferred to the QuickSee, and installed, in that order (Figure 5, Figure 6, Figure 7, Figure 8).
QuickSee will inform you that it must reboot to complete the installation. Tap the ✔ button to confirm the reboot (Figure 9 and Figure 10).
QuickSee Free
QuickSee Free Pro Keratometry
QuickSee Free Software
QuickSee
© 2024 PlenOptika. All rights reserved. | No. RII-AEE: 14923 | No. RII-PyA: 4987
Are you ready to learn how to use QuickSee Free / Free Pro effectively? Tell us about yourself and your circumstances and we will reach out to arrange a training session with you.
Are you ready to learn how to use QuickSee Free / Free Pro effectively? Tell us about yourself and your circumstances and we will reach out to arrange a training session with you.
QuickSee Free Pro flew on the history-making Polaris Dawn mission to measure changes in the astronauts’ vision